| CAS Number | 129-03-3 |
|---|---|
| Molecular Formula | C21H21N |
| Molecular Weight | 287.407 |
| InChI Key | JJCFRYNCJDLXIK-UHFFFAOYSA-N |
| LogP | 4.69 |
| Synonyms |
|
Applications:
HPLC MS Method for Analysis of Cyproheptadine Hydrochloride on Primesep 100 Column
November 13, 2026
HPLC Method for Cyproheptadine on Primesep 100 by SIELC Technologies

Cyproheptadine is a first-generation antihistamine with the formula C21H21N. It is used primarily in treatment of allergies, insomnia, and serotonin syndrome. It is occasionally used as an appetite stimulant. It works sas the inverse agonist of the histamine H1 receptor. You can find detailed UV spectra of Cyproheptadine and information about its various lambda maxima by visiting the following link.
Cyproheptadine can be retained, and analyzed using a Primesep 100 mixed-mode stationary phase column. The analysis utilizes an isocratic method with a simple mobile phase consisting of water, acetonitrile (MeCN), and ammonium formate as a buffer. Detection is carried out using UV
| Column | Primesep 100, 2.1 x 100 mm, 5 µm, 100 A, dual ended |
| Mobile Phase | MeCN/H2O – 90/10% |
| Buffer | Ammonium formate pH 3.0 – 20 mM |
| Flow Rate | 0.2 ml/min |
| Detection | LC MS ESI SIM 288 (M+H)+ , UV 286 nm |
| Class of Compounds | Medication |
| Analyzing Compounds | Cyproheptadine |
Application Column
Primesep 100
Column Diameter: 2.1 mm
Column Length: 100 mm
Particle Size: 5 µm
Pore Size: 100 A
Column options: dual ended
LC MS Detection
HPLC UV Method for Analysis of Cyproheptadine Hydrochloride on Primesep 100 Column
October 29, 2026
HPLC Method for Cyproheptadine on Primesep 100 by SIELC Technologies

Cyproheptadine is a first-generation antihistamine with the formula C21H21N. It is used primarily in treatment of allergies, insomnia, and serotonin syndrome. It is occasionally used as an appetite stimulant. It works sas the inverse agonist of the histamine H1 receptor. You can find detailed UV spectra of Cyproheptadine and information about its various lambda maxima by visiting the following link.
Cyproheptadine can be retained, and analyzed using a Primesep 100 mixed-mode stationary phase column. The analysis utilizes an isocratic method with a simple mobile phase consisting of water, acetonitrile (MeCN), and H2SO4 as a buffer. Detection is carried out using UV
| Column | Primesep 100, 4.6 x 150 mm, 5 µm, 100 A, dual ended |
| Mobile Phase | MeCN/H2O – 70/30% |
| Buffer | H2SO4 – 0.1% |
| Flow Rate | 1 ml/min |
| Detection | UV 200 nm |
| LOD* | 5 ppb |
| Class of Compounds | Medication |
| Analyzing Compounds | Cyproheptadine |
Application Column
Primesep 100
Column Diameter: 4.6 mm
Column Length: 150 mm
Particle Size: 5 µm
Pore Size: 100 A
Column options: dual ended
Uv-Vis Spectrum of Cyproheptadine
October 28, 2026
Access the UV-Vis Spectrum SIELC Library

If you are looking for optimized HPLC method to analyze Cyproheptadine check our HPLC Applications library
UV/Vis.: λmax: 191 nm, 225 nm, 286 nm
For optimal results in HPLC analysis, it is recommended to measure absorbance at a wavelength that matches the absorption maximum of the compound(s) being analyzed. The UV spectrum shown can assist in selecting an appropriate wavelength for your analysis. Please note that certain mobile phases and buffers may block wavelengths below 230 nm, rendering absorbance measurement at these wavelengths ineffective. If detection below 230 nm is required, it is recommended to use acetonitrile and water as low UV-transparent mobile phases, with phosphoric acid and its salts, sulfuric acid, and TFA as buffers.
For some compounds, the UV-Vis Spectrum is affected by the pH of the mobile phase. This compound was diluted in a mixture of water and acetonitrile. The method was done with a mixture of water and acetonitrile.
Separation of Cyproheptadine on Newcrom R1 HPLC column
May 16, 2018
Cyproheptadine can be analyzed by this reverse phase (RP) HPLC method with simple conditions. The mobile phase contains an acetonitrile (MeCN), water, and phosphoric acid. For Mass-Spec (MS) compatible applications the phosphoric acid needs to be replaced with formic acid. Smaller 3 µm particles columns available for fast UPLC applications. This liquid chromatography method is scalable and can be used for isolation impurities in preparative separation. It also suitable for pharmacokinetics.
Application Column
Newcrom R1
The Newcrom columns are a family of reverse-phase-based columns. Newcrom A, AH, B, and BH are all mixed-mode columns with either positive or negative ion-pairing groups attached to either short (25 Å) or long (100 Å) ligand chains. Newcrom R1 is a special reverse-phase column with low silanol activity.
Select options


