| CAS Number | 71-27-2 |
|---|---|
| Molecular Formula | C14H30Cl2N2O4 |
| Molecular Weight | 361.300 |
| InChI Key | YOEWQQVKRJEPAE-UHFFFAOYSA-L |
| LogP | -3.47 |
| Synonyms |
|
Applications:
Uv-Vis Spectrum of Suxamethonium Chloride (Succinylcholine)
January 19, 2026
If you are looking for optimized HPLC method to analyze Succinylcholine chloride, Succinylcholine check our HPLC Applications library
For optimal results in HPLC analysis, it is recommended to measure absorbance at a wavelength that matches the absorption maximum of the compound(s) being analyzed. The UV spectrum shown can assist in selecting an appropriate wavelength for your analysis. Please note that certain mobile phases and buffers may block wavelengths below 230 nm, rendering absorbance measurement at these wavelengths ineffective. If detection below 230 nm is required, it is recommended to use acetonitrile and water as low UV-transparent mobile phases, with phosphoric acid and its salts, sulfuric acid, and TFA as buffers.
For some compounds, the UV-Vis Spectrum is affected by the pH of the mobile phase. The spectra presented here are measured with an acidic mobile phase that has a pH of 3 or lower.
Succinylcholine chloride
HPLC Determination of Succinylcholine on Newcrom AH Column
June 29, 2021
HPLC Method for Succinylcholine chloride, Succinylcholine on Newcrom AH by SIELC Technologies

High Performance Liquid Chromatography (HPLC) Method for Analysis of Succinylcholine
Succinylcholine chloride is a short-acting depolarizing neuromuscular blocker used as a short-term muscle relaxant. Succinylcholine is often used as an adjunct therapy in patients undergoing electroconvulsive shock therapy to control muscle contractions that are induced as a result of the electrical impulses delivered during the procedure.
By using a Newcrom AH mixed-mode column with a cation-exchange mechanism, Succinylcholine can be determinate in a short time using an isocratic method with a simple mobile phase of water, acetonitrile (MeCN, ACN) and a perchloric acid (HClO4) buffer. UV detection at 200 nm.
| Column | Newcrom AH, 4.6 x 150 mm, 5 µm, 100 A, dual ended |
| Mobile Phase | MeCN/H2O – 15/85% |
| Buffer | HClO4 – 0.85% |
| Flow Rate | 1.0 ml/min |
| Detection | UV, 200 nm |
| Class of Compounds |
Drug |
| Analyzing Compounds | Succinylcholine chloride, Succinylcholine |
Application Column
Newcrom AH
Column Diameter: 4.6 mm
Column Length: 150 mm
Particle Size: 5 µm
Pore Size: 100 A
Column options: dual ended
Succinylcholine chloride
Separation of Succinylcholine chloride on Newcrom R1 HPLC column
February 16, 2018
Succinylcholine chloride can be analyzed by this reverse phase (RP) HPLC method with simple conditions. The mobile phase contains an acetonitrile (MeCN), water, and phosphoric acid. For Mass-Spec (MS) compatible applications the phosphoric acid needs to be replaced with formic acid. Smaller 3 µm particles columns available for fast UPLC applications. This liquid chromatography method is scalable and can be used for isolation impurities in preparative separation. It also suitable for pharmacokinetics.
Application Column
Newcrom R1
The Newcrom columns are a family of reverse-phase-based columns. Newcrom A, AH, B, and BH are all mixed-mode columns with either positive or negative ion-pairing groups attached to either short (25 Å) or long (100 Å) ligand chains. Newcrom R1 is a special reverse-phase column with low silanol activity.
Select options


