| CAS Number | 106-49-0 |
|---|---|
| Molecular Formula | C7H9N |
| Molecular Weight | 107.156 |
| InChI Key | RZXMPPFPUUCRFN-UHFFFAOYSA-N |
| LogP | 1.39 |
| Synonyms |
|
Applications:
Separation of Toluidine and Aminobiphenyl Isomers
July 6, 2015
Toluidine isomers and aminobyphenyl isomers are organic compounds each with a substituted amine group. Primesep 200 was used to separate these isomers. Primesep 200 separates isomers by interacting with polar molecules, retaining basic compounds, and additionally by reverse phase mechanism.
| Column | Primesep 200, 4.6×150 mm, 5 µm, 100A |
| Mobile Phase | MeCN/H2O |
| Buffer | AmFm Ph 3.5 |
| Flow Rate | 1.0 ml/min |
| Detection | UV, 250 nm |
| Class of Compounds |
Hydrophobic, Ionizable |
| Analyzing Compounds | o-Toluidine, 2-Aminobiphenyl, m-Toluidine, p-Toluidine, 4-Aminobiphenyl |
Application Column
Primesep 200
The Primesep family of mixed-mode columns offers a wide variety of stationary phases, boasting unprecedented selectivity in the separation of a broad array of chemical compounds across multiple applications. Corresponding Primesep guard columns, available with all stationary phases, do not require holders. SIELC provides a method development service available to all customers. Inquire about our specially-tailored custom LC-phases for specific separations.
Select options4-Aminobiphenyl
m-Toluidine
o-Toluidine
p-Toluidine
HPLC Separation of Toluidine Isomers in Cation-Exchange Mode
July 14, 2011
Isomers of toluidine were successfully retained and separated in cation-exchange mode on a Primesep S2 column. Primesep S2 column is a HILIC/cation-exchange column that can be operated in HILIC, cation-exchange, and anion-exclusion modes. Method and column are compatible with ELSD/LC/MS and UV and can be used for routine analysis of polar molecules.
Application Column
Primesep S2
The Primesep family of mixed-mode columns offers a wide variety of stationary phases, boasting unprecedented selectivity in the separation of a broad array of chemical compounds across multiple applications. Corresponding Primesep guard columns, available with all stationary phases, do not require holders. SIELC provides a method development service available to all customers. Inquire about our specially-tailored custom LC-phases for specific separations.
Select optionsm-Toluidine
o-Toluidine
p-Toluidine
HPLC Method for Separation of Toluidine Isomers on Primesep 200 Coulmn
December 31, 2005
Toluidine isomers are based on toluene and differ whether the primary amine is ortho, meta or para to the methyl group. A Primesep 200 column with an ammonium formate buffer or a Primesep 100 column with sodium phosphate baseline resolves the three regioisomers. The HPLC separation uses a mobile phase of water, acetonitrile (MeCN, ACN), ammonium formate, or sodium phosphate and ultraviolet (UV) detection at 250 nm.
Application Column
Primesep 200
Column Diameter: 4.6 mm
Column Length: 150 mm
Particle Size: 5 µm
Pore Size: 100 A
m-Toluidine
o-Toluidine
p-Toluidine
UV Detection
HPLC Method for Separation of Toluidine Isomers on Primesep 100 Column
June 12, 2004
Toluidine isomers are based on toluene and differ whether the primary amine is ortho, meta or para to the methyl group. A Primesep 200 column with an ammonium formate buffer or a Primesep 100 column with sodium phosphate baseline resolves the three regioisomers. The HPLC separation uses a mobile phase of water, acetonitrile (MeCN, ACN), ammonium formate, or sodium phosphate and ultraviolet (UV) detection at 250 nm.
o-Toluidine
p-Toluidine
